|
Spectrum Analyzer 0.15 to
1050MHz |
|
|
Frequency
- Frequency Range: 0.15 MHz to
1050MHz
- Frequency Resolution displayed:
10kHz (5½ Digit in Readout)
- Center Frequency Range: 0.15 MHz -
1050 MHz
- Accuracy: ±100kHz
- Stability (Drift):
<150kHz / hour
- Span: Zero span and 100kHz/Div to
100MHz/Div in steps of 1-2-5-10
- Accuracy: ±5%
- Marker: absolute Marker
- Marker Resolution (Frequency): 5½ digits
- Marker Resolution (Level): 3½ digits
- Marker Readout Accuracy: ±(0.1%
span + 100kHz)
- Resolution Bandwidth, RBW (3dB):
9kHz, 120kHz and 400kHz
- Video Bandwidth, VBW: 4kHz
- SWT (fixed): 40ms, 320ms,
1s*)
|
Amplitude
- Measurement Range: -100dBm to
+13dBm
- Displayed Average Noise Level:
-102dBm (120kHz RBW)
- Frequency Response: Relative to
500 MHz, ATTN 10 dB±2 dB
- Input Attenuator Range: 0 - 40 dB,
10 dB steps
- Accuracy (reference level): ±1
dB
- Maximum Safe Input Level
- Attenuator setting 20 dB: +20 dBm (0,1W)
- Attenuator setting 0dB: +10 dBm
- DC: ±25 V
- Display Range: 40, 80 dB, 8
Divisions
- Scale Units: dBm
- Reference Level: -99 to +13 dBm
(+var.)
- Resolution Bandwidth Switching Uncertainty: ±1dB
- Spurious responses:
- Intermodulation (3rd
Order): -75 dBc
- (2 Signals, 27 dBm each, Frequency distance >3MHz)
- Harmonic Distortion (2nd,
3rd): < -75 dBc
- Absolute Amplitude Accuracy: ±2.5
dB
|
Inputs / Outputs
- Front Panel
- Input Connector: BNC (F)
Impedance: 50 Ohm
- Probe Power: 6V (Near field
probes)
- Tracking Generator Out (HM5014):
BNC (F) Impedance: 50 Ohm
|
Special Functions
- Average: 32 measurements
- SAVE/RECALL: 9 complete
Set-ups
- Peak-Detection
- Max. Hold
- Hold: Trace stored on
screen
- Reference Curve
- AM-Demodulator: Ear Phones
|
Tracking Generator (only HM5014)
- Output Frequency Range: 150 kHz to
1050 MHz
- Output Power Level: -50dBm bis
+1dBm
- Output flatness (150 kHz to 1
GHz): ±1.0dB
- Spurious Outputs
- Harmonic Spurs: <20dBc
- Non-Harmonic Spurs: <20dBc
|
General Information
- Temperature Range
- Operating: 10°C to 40° C
- Storage: -40°C to 70° C
- Power Requirements
- Voltage: 115 / 230V
- Frequency: 50-60Hz
- Power consumption: approx. 43VA
- CRT: 8 x 10cm
- Protective System: Safety Class I
(IEC 1010-1)
- Dimensions: W 285, H 125,
D 380mm
- Weight: approx.: 6kg
- *) only if EMC set-up is used
| | |
| | |